Re: Can't open display in Exceed 6.2(NT4) and Solaris 2.6
From: Khin Nyo Nu (
)
Date: Tue Sep 19 2000 - 22:20:42 EDT
Jim,
There are already PC hosts entries in the /etc/hosts file but still giving
the same problem. Now one more thing I traced out is that I found some
error lines in the exceed.log file as follow:
"Cannot open font server tcp/bujs02.:7100"
At the same time, when I check the Unix site, there is some error
information in the /var/dt/Xerrors file as follow:
error (pid 382): ß?@/usr/openwin/bin/xset: bad font path element (#46),
possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
Incorrect font server address or syntax
When I checked the font path in Unix site, /usr/openwin/lib/X11/fonts
exists and there are corresponding fonts found under their respective path
such as 100dpi,75cpi,misc and etc. So I don't know what to do more. Could
you please keep advised more on this issue?
thanks & regards,
Khin Nyo Nu.
At 02:58 PM 9/19/00 -0400, you wrote:
>Make sure that you have entries for each PC in the
>/etc/hosts file on the Unix server and name MUST match
>the PC's configured name (Control Panel ... Network ...
>TCP/IP ... DNS).
>
>If you are trying to run OpenWindows, you may need to
>cp /usr/openwin/lib/Xinitrc ~/.xinitrc
>
>Regards,
>Jim Frost
>----
> |\ __ James E. Frost - Technical Product Mgr
> |\ \ / 0------ Hummingbird
> \\ \/ / 6225 Crain Highway
> \\ / Upper Marlboro, MD 20772-4149
> / / Tel: 301-627-9483 Fax: 301-627-9485
> / / Email:
> // WWW: http://www.hummingbird.com
>-----Original Message-----
>From: Khin Nyo Nu <
>
>To:
<
>
>Date: Tuesday, September 19, 2000 1:59 PM
>Subject: Can't open display in Exceed 6.2(NT4) and Solaris 2.6
>
>
> >Hi there ......
> >
> >I have problem with Exceed v6.2 on NT4 server.
> >Whenever I tried to luanch XDMCP(Broadcast)to Solaris 2.6 machine using
> >TCP/IP broadcast address from XDMCP Display Manager Chooser menu, it let me
> >wait long time black screen and then immediately reset to XDMCP Display
> >Manager Chooser menu. No login screen from Solaris Unix machine is coming
>up.
> >
> >I usually used the same Exceed version on NT4 workstation to the same
> >Solaris Unix machine. No problem at all. I have all the same settings as
> >the working one in Xconfig such as Single Window, Use Broadcast Address.
> >
> >What else should I check out? Could anyone please advise me?
> >
> >thanks in advance!
> >Khin Nyo Nu.
This archive was generated by hypermail 2b29
: Sat Sep 30 2000 - 00:00:27 EDT
|
