Re: Problem running exceed over VPN
From: Saravana Kumar (
)
Date: Tue Jul 30 2002 - 00:49:05 EDT
Hi Seth,
I have tried on that..but still doesnt work.....can have a full
command for this ...please do help me out this. Thank you
BEST REGARDS
SARAVANA KUMAR
ISD
PKTECH SDN BHD
OFF : +603-77851149
HP : +60127270024
DISCLAIMER
The information in this e-mail and any attachment(s) are confidential and
may contain Privileged Information and copyright material and is intended
solely for the intended addressee(s) and for authorized use and purposes
only. If you are not an intended recipient, please delete the message and
any attachments and notify the sender of misdelivery.
Any disclosure, printing, copying, re-transmission, dissemination and use
thereof in any manner, or acting in reliance thereupon, by person(s) other
than the intended addressee(s) or use of which is authorized, is strictly
prohibited.
Any views or opinions presented are those of the author and are not given or
endorsed by any entity within the PKTech Group of Companies unless clearly
indicated in this message and the authority of the author to so bind the
PKTech Group entity referred to is duly verified. PKTech does not accept
legal responsibility for the contents of this message.
All liability for computer viruses is excluded to the fullest extent
permitted by law.
-----Original Message-----
From: Seth Kurtzberg [mailto:
]
Sent: Tuesday, July 30, 2002 1:01 AM
To: Title: ExceedUsers
Cc: Saravana Kumar
Subject: Re: Problem running exceed over VPN
Usually, when a VPN is used, the "inside" part of the VPN is assigned a
dynamic IP address. The DISPLAY variable on the client needs to be set to
this dynamic IP address (followed by :0.0 or :0).
On Monday 29 July 2002 00:49, you wrote:
> Hi Team,
> I'm using a hummingbird exceed. I'm having problem
> connecting to a server is being connected via VPN. I need to use REXEC
> and I have open the port for it as well. I guest there is some error on
> my command if i'm connecting to the server via VPN. Could you please let
> me know whether there is any other commands? The command which I'm using
> now works fine if it's connected directly but not working via VPN.
> Please do help me out on this issue and kindly do get back to me as soon
> as possible. Thank you.
>
> My current command: @(XTerm, method=stdappdb) -display @d&@;
>
> BEST REGARDS
> SARAVANA KUMAR
> ISD
> PKTECH SDN BHD
> OFF : +603-77851149
> HP : +60127270024
>
>
>
> DISCLAIMER
>
> The information in this e-mail and any attachment(s) are confidential
> and may contain Privileged Information and copyright material and is
> intended solely for the intended addressee(s) and for authorized use and
> purposes only. If you are not an intended recipient, please delete the
> message and any attachments and notify the sender of misdelivery.
>
> Any disclosure, printing, copying, re-transmission, dissemination and
> use thereof in any manner, or acting in reliance thereupon, by person(s)
> other than the intended addressee(s) or use of which is authorized, is
> strictly prohibited.
>
> Any views or opinions presented are those of the author and are not
> given or endorsed by any entity within the PKTech Group of Companies
> unless clearly indicated in this message and the authority of the author
> to so bind the PKTech Group entity referred to is duly verified. PKTech
> does not accept legal responsibility for the contents of this message.
>
> All liability for computer viruses is excluded to the fullest extent
> permitted by law.
--
Seth Kurtzberg
MIS
480-661-1849
Pager 888-605-9296 or
Cell 480-620-1099
This archive was generated by hypermail 2b29
: Wed Jul 31 2002 - 23:54:01 EDT
|
